Waykar dehumidifier troubleshooting

When I experienced my first dehumidifier malfunction, it was a stressful situation. The air in my home suddenly seemed stuffy and uncomfortable, and I knew I had to solve the issue quickly. After some research on the internet, I decided to try solving the problem myself with Waykar Dehumidifier Troubleshooting.

In Waykar dehumidifier troubleshooting the main cause of malfunction is a filter that has become clogged. To resolve this issue, just access the dehumidifier, examine the filter, and clean it in case of dirt accumulation. If the filter is not dirty, then go ahead and substitute it with a new one.

I will cover the different troubleshooting steps when it comes to Waykar dehumidifiers and how to identify potential issues. Let’s dive into the depth of this troubleshooting process to solve your problem.

Waykar dehumidifier not working it's causes & solutions

Reasons of Waykar dehumidifier troubleshooting:

Here are a few key challenges encountered during the Waykar dehumidifier troubleshooting process:

  • Waykar dehumidifier does not work
  • Not dry the air as it should
  • Not collecting water
  • Red light blinking of Waykar dehumidifier 
  • Makes loud noise when operating
  • Not draining water through hose
  • Operates continuously
  • Overflow of water on floor
  • Waykar dehumidifier Error Code

Waykar dehumidifier No Working:

_waykar dehumidifier not working

If your Waykar dehumidifier just isn’t working, there are a few things that you can do in order to diagnose and solve the issue.

  1. The power cord has been disconnected.
  2. Is the room temperature higher
  3. The room temperature within the range of 41°F (5°C) and 68°F (20°C)?
  4. The dehumidifier is currently undergoing the defrosting process.
  5. The room’s humidity fallen below or reached the preset humidity level?
  6. The machine is equipped with a feature to prevent frequent starts.
  7. The room’s humidity level is low.
  8. Low refrigerant fluid.

The power cord has been disconnected:

If the power cord has been disconnected, then it could be as simple as reconnecting it back to its original position.

Plug is pushed completely into the outlet

Make sure that the power cord is securely connected and you should hear a click sound when you plug in the dehumidifier. Furthermore, be sure to check if any of the outlets are emitting sparks or smells, which can indicate a faulty outlet.

High room temperature:

If the room temperature is higher than 95°F (35°C) or lower than 41°F (5°C), it could be causing your dehumidifier to malfunction. This is because the machine is designed to work efficiently only within a certain temperature range.

Therefore, check if the room temperature falls within this range and make adjustments accordingly. Additionally, your dehumidifier is programmed to shut down automatically in order to protect itself from overheating. So,the machine will also kick into an emergency shutdown mode, which will require a manual reset.

Room temperature is 41°F (5°C) and 68°F (20°C):

If the room temperature is within the range of 41°F (5°C) and 68°F (20°C), it could be causing your dehumidifier to shut down. This is because when running under lower ambient temperature, the machine will automatically go into defrost mode in order to protect itself from damage.

During this process, no air is being dehumidified and the LCD and indicators may start flashing. However, this is a normal phenomenon and will stop when the defrost process is complete. After this happens, your machine should restart automatically and resume dehumidifying the air.

The dehumidifier is currently undergoing the defrosting process:

If the dehumidifier is currently undergoing the defrosting process, then you need not worry. This is a normal phenomenon and it is meant to protect your machine from damage due to cold temperatures. During this process, the compressor will cease and all of the indicators will start flashing.

However, you do not need to take any action as the machines are programmed to start up again automatically after the defrost process is complete. All you need to do is wait for it to finish and your dehumidifier will be back in action, removing moisture from the air.

If you want to avoid this issue in future, then you should not place your machine in an area with rapid temperature changes or excessive humidity.

This is because the machine needs to maintain a certain temperature range in order to work efficiently and your best bet is to keep it in an area that has a consistent temperature.

The room’s humidity fallen below or reached the preset humidity level?

If your room’s humidity has fallen below or reached the preset level, then your dehumidifier will enter Standby Mode and the LCD and indicators will start flashing. This could be a sign that the device is done with its job of removing moisture from the air and it is now in waiting mode until it senses an increase in humidity.

To prevent this from happening, you can either decrease the preset humidity level by 5-10% of the room’s current humidity or set it to a constant 30%. This will ensure that your dehumidifier will only enter Standby Mode when the humidity level reaches a certain point and not before.

The machine is equipped with a feature to prevent frequent starts?

The Waykar dehumidifier is equipped with a feature that prevents it from starting up too frequently. This is to ensure that the machine works efficiently and does not overheat itself due to frequent starts.

Therefore, if the machine has just stopped working or you are having difficulty getting it to start, then it could be because of this particular feature. In order to get it working again, you need to wait for more than 3 minutes before trying to start the machine.

The room’s humidity level is low:

When the room’s humidity level is low, your dehumidifier will be unable to remove any moisture from the air. This is because the machine is designed to work in the humidity range of 30% – 80%. If the humidity level falls below or above this range, then it will not be able to work properly and you may need to adjust the settings accordingly.

In order to prevent this issue from happening, you should always check the humidity levels of your room before turning on the dehumidifier. Keeping it at a constant 30% or 80% will ensure that your machine works efficiently and does not overheat itself due to excessive starts.

Low refrigerant fluid:

When a dehumidifier’s refrigerant fluid is low, it means that the evaporator coils haven’t been able to get cold enough to draw moisture from the air. This can be caused by tiny cracks forming in the coil system over time, allowing the refrigerant fluid to slowly leak out. The only way to fix this issue is for a professional plumber or HVAC technician to recharge the coils with more refrigerant fluid.

Waykar dehumidifier does not dry the air as it should:

If you find that the Waykar dehumidifier is not drying the air as it should, then this could be due to a few different issues.

The issues and there solution are as follow:

  • The air filter has accumulated dirt.
  • Is there any obstruction at the air inlet or air outlet?
  • The dehumidifier’s size is inadequate for the intended application.
  • Insufficient air circulation.
  • Adequate time was not given for moisture removal.
  • The room hasn’t been properly sealed.
  • The room temperature is either too low or below 41°F (5°C) (This leads to the machine not functioning or reduced dehumidification efficiency in low temperatures).
  • Perform a cleaning of the air filter.
  • Clear any obstructions from the air inlet or outlet.

Their Solutions are as follow:

  • Consider augmenting the dehumidification capacity by using a larger dehumidifier.
  • Maintain approximately 7.9 inches (20cm) of space around the product.
  • Upon initial installation, allocate a minimum of 3-4 days to effectively achieve and maintain the desired relative humidity.
  • Ensure that all doors, windows, and other openings are properly closed.
  • Kindly wait until the temperature surpasses 5°C or higher.

Waykar dehumidifier Not collecting water:

I once faced the issue of my Waykar dehumidifier not collecting water, which was quite frustrating. After doing some research, I figured out that there could be an issue with the air filter or insufficient air circulation in the room.

_waykar dehumidifier not collecting water

The reasons of these issues are as follow:

  • Frozen Coils
  • Low Refrigerant
  • Fan Motor
  • Faulty Overload Protection

Frozen Coils:

When the temperature becomes too low, moisture will often freeze on the coils of your dehumidifier. This can cause a decrease or stop in water collection.

An auto-defrost feature is designed to help prevent this from happening by defrosting the coils when needed. If you have an auto-defrost feature and are still seeing ice on your dehumidifier coils, it’s likely that the defrost feature is malfunctioning.

Low Refrigerant:

If the refrigerant in your Waykar dehumidifier is low, it means that the unit can’t efficiently cool the air. This prevents it from providing enough cold air to reach a temperature that will allow condensation to form and collect water. Without adequate cooling, airflow over the coils will not be sufficient for effective condensation, so no water can be collected.

Fan Motor:

Sometimes the Waykar dehumidifier may not collect water, even if the humidity level is where it should be and the filters are clean. This can usually be traced to a problem with the fan motor, which either could be blocked or restricted, or simply defective. If there is a hum coming from the unit but no air movement, then this is likely what is causing the issue.

Faulty Overload Protection:

When the overload protection inside a Waykar dehumidifier fails, it won’t start or collect water. In such cases, extension cords are usually to blame. You can try testing for this yourself using a multimeter, but it may be best to call in an expert as you’ll need to tinker with circuits and wiring inside the dehumidifier.

Waykar dehumidifier Red light blinking:

I once faced an issue with my Waykar dehumidifier where the red light indicator kept blinking. It turns out that when this happens, it’s because the water tank is full and needs to be emptied.

Red light blinking of Waykar dehumidifier

To prevent this from happening in the future, what I do is set a reminder for myself every three or four days to check on how much water is in the tank. If I see that it’s getting too full, then I’ll go ahead and empty it out before the light starts blinking.

It’s also important to make sure that the air filter isn’t clogged with dust or other debris. This can impede air flow and cause your dehumidifier to stop working properly. Cleaning the filter at regular intervals can help prevent this from happening.

Finally, make sure the room that you’re using the dehumidifier in has good air circulation and isn’t too humid.

Waykar dehumidifier makes loud noise when operating:

Troubleshooting of loud noise of Waykar dehumidifier

I once faced an issue with my Waykar dehumidifier where it was making a loud noise when operating. There are three main causes for this issue:

  1. The dehumidifier is not placed on a level surface.
  2. Is there any obstruction present around the air inlet? The air filter is obstructed.
  3. Has the filter been installed properly?

The solution of these problem are as follow:

  1. Adjust the machine to a flat, horizontal position.
  2. Remove dirt from both the air outlet and intake.
  3. Verify if the filter packaging bag has been removed and correctly installed.

Waykar dehumidifier Not draining water through hose:

I once faced an issue with my Waykar dehumidifier where it wasn’t draining water through the hose. I was quite confused as a few days prior, everything had been working fine and suddenly this problem occurred.

Not draining water through hose

After doing some research, I figured out that there were three possible causes for this issue:

  1. The hose could be blocked, kinked, or disconnected.
  2. The pump could be damaged or clogged.
  3. There may not be enough water in the tank to trigger the float switch to activate the pump.

The solutions to these problems are as follows:

  1. Remove any blockage from the hose and make sure it is connected securely on both ends.
  2. If the pump appears to be clogged or malfunctioning it should be replaced with a new one.
  3. The float switch will not activate if there is insufficient water in the tank, so make sure that you fill it up before trying again.

With these solutions, I was able to get my dehumidifier working again. I learned to pay close attention as small details can often make a difference in the performance of your dehumidifier.

Waykar dehumidifier operates continuously:

The other day, I faced an issue with my Waykar dehumidifier where it seemed to be running continuously. This was quite strange as usually, it would shut off after a while when the room had reached optimal humidity levels.

  1. Verify whether the dehumidifier is set to CONTINUOUS MODE.
  2. The room’s humidity level is excessively elevated.
  3. Doors and windows remain ajar.

The solution for these issues is very simple:

  1. Avoid setting the humidity too low. Generally, humidity settings of around 40-50% are recommended.
  2. Adjust the humidity settings or consider using a dehumidifier with a higher capacity.
  3. Confirm the closure of all doors, windows, and other openings.

By following these solutions, I was able to get my dehumidifier working normally again. It’s important to pay attention to the environment and settings of your dehumidifier as this can help keep it running smoothly and efficiently.

Waykar dehumidifier Overflow of water on floor:

Overflow the water on floor due to waykar dehumidifier

I once faced an issue with my Waykar dehumidifier where water had overflowed on the floor. After some investigation, I found that there were three main causes for this problem:

  1. The hose-to-connector or hose connection might be improperly secured.
  2. The water bucket hasn’t been correctly installed.
  3. The float within the water tank might be jammed.
  4. The magnet on the float has become detached

The solution of this problems are as follow:

  1. Ensure a secure connection of the hose to the drain outlet.
  2. Properly reinstall the water bucket.
  3. Adjust the float to allow for unrestricted movement.
  4. Place the magnet in the correct position.

Waykar dehumidifier Error Code:

When it comes to Waykar dehumidifiers, there are various error codes that may appear on the display and indicate what kind of issue you’re having. The most common ones include E1, E2, E3, E4, and F1.

E1 Error Code – This is usually indicative of a blockage in the air filter. Be sure to clean or replace the filter if you see this code on your display.

E2 Error Code – This usually occurs when the room temperature is too high for the dehumidifier to properly control the humidity. To fix this, reduce the room temperature and make sure there’s good air circulation in the area.

E3 Error Code – This usually indicates a high humidity level in the room. Turn down the humidity setting on your dehumidifier, or consider using one with a higher capacity.

E4 Error Code – This error code is indicative of excessive condensation forming inside the unit. To solve this issue, you may need to clean and replace some parts inside the dehumidifier.

F1 Error Code – This code is usually displayed when the float switch is malfunctioning or not working properly. To fix this, you’ll need to check the float and its connections to make sure it’s in proper working order.

If you’re still having trouble with your dehumidifier after trying these solutions, then it may be time to invest in a new one. With the right maintenance and proper use, your Waykar dehumidifier should last you many years.

Conclusion:

Maintaining your Waykar dehumidifier is not as difficult as it may seem, and a few simple troubleshooting tips can help ensure that your device runs smoothly and efficiently. By taking the time to monitor it’s settings, clean the air filters, and check for any potential issues, you can extend the life of your dehumidifier.

Plus, if you do run into any trouble, there are several solutions that can help you get it back up and running again in no time. So don’t hesitate to give your dehumidifier a little TLC – it’ll be sure to pay off in the long run!

Related F.A.Qs:

What is a common problem with a dehumidifier?

The most common problem with a dehumidifier is that it’s not draining water properly. This can be caused by a blockage in the hose, an issue with the pump, or insufficient water in the tank to trigger the float switch.

How do I maintain my Waykar dehumidifier?

Maintaining your Waykar dehumidifier is important for keeping it running at its best. Make sure to monitor the settings, clean the air filters regularly, and check for any potential issues.

What do I do if my dehumidifier is displaying an error code?

If your dehumidifier is displaying an error code, the issue could be caused by several things. Depending on what the code is, you may need to change the humidity settings, clean or replace the air filter, adjust the float switch, or invest in a new unit.

About The Author

Scroll to Top