Midea dehumidifier Not working

It can be extremely frustrating when your dehumidifier stops working. And with the Midea dehumidifier, it can feel even more disheartening. After all, you’ve invested in a quality product and now it’s not working as expected. If your Midea dehumidifier has stopped working, the first thing to do is not panic.

If your Midea dehumidifier not working, the main reason of this issue is a power supply. Ensure you examine the power connection, plug, and voltage of your dehumidifier.

In this blog post, we’ll provide you with the most common issues that could be causing your Midea dehumidifier to not work.

Midea Dehumidifier Not Working

Midea dehumidifier Not working:

Midea dehumidifier Not working

The main causes of your Midea dehumidifier not working include:

  • Make sure the dehumidifiers plug in.
  • Check the house fuse/circuit breaker box.
  • Dehumidifier has reached its preset level or bucket is full
  • Water bucket is not in the proper position

The dehumidifier is not plug in:

When your Midea dehumidifier is not plugged in, it won’t start to work. This is likely the simplest issue to diagnose when dealing with a non-working dehumidifier.

First and foremost, double-check that the plug is connected securely at both ends – from the wall outlet and into the back of your machine.

The house fuse/circuit breaker box:

If the house fuse or circuit breaker box is tripped, your Midea dehumidifier may not start. To check this, locate the electrical panel in which fuses and circuit breakers are located.

If you find that a specific fuse has been blown or a circuit breaker has been tripped, replace it with one of the same rating and reset the switch. If the fuse or circuit breaker trips again after restarting, it’s time to contact an electrician.

Dehumidifier has reached its preset level:

When the dehumidifier has reached its preset level, it will not start to work. This is because it’s designed to preserve energy and prevent over-humidification of your home.

Dehumidifier has reached its preset level

The “set” humidity or target relative humidity (RH) level is set by you when you first turn on the dehumidifier. The dehumidifier runs until the relative humidity in your home drops below this setting. Once it does, the machine will automatically turn off and stop working.

Water bucket is not in the proper position:

When the water bucket is not in the proper position, your Midea dehumidifier won’t start. Make sure to check that the container is securely and correctly seated in its compartment. If it’s out of place or not seated properly, the machine won’t be able to collect moisture from the air.

Water bucket is not in the proper position

To ensure everything is working as it should be, make sure the bucket is firmly in place. Depending on the model of your dehumidifier, you may need to check that there is no standing water in the container or a buildup of scale due to hard water.

Error code of Midea dehumidifier:

Error codes can be quite daunting when they appear on any appliance, and a dehumidifier is no exception. Error codes are essentially your device’s way of communicating to you what is wrong so that you can troubleshoot the problem. Each code has its own meaning depending on the manufacturer and model of your dehumidifier.

Error code of Midea dehumidifier

When it comes to Midea dehumidifiers there are different types of error codes, ES, AS, P2, EC, Eb and E3 appear in the display.

AS – Humidity sensor error:

Disconnect the device from the power source and then reconnect it. If the error continues, please get in touch with Customer Service.

ES – Evaporator’s tube temperature:

Error indicating an issue with the evaporator’s tube temperature sensor – Attempt to resolve by unplugging the unit and then plugging it back in. Should the error persist, please reach out to our Customer Service for assistance.

P2 – Bucket full or improperly positioned:

Empty the bucket and reposition it correctly. (This applies only to units without a pump feature.)

EC – Detection of refrigerant leakage:

The display will show “EC” when the unit identifies refrigerant leakage. Should the error continue, please get in touch with our Customer Service.

E3 – Device malfunction:

Disconnect the unit from power and then reconnect it. If the error persists, please reach out to Customer Service for assistance.

Eb – Bucket absent or improperly positioned:

Reinstall the bucket in the correct position. (This applies solely to units equipped with a pump feature.)

Midea Dehumidifier does not dry the air as it should:

It can be extremely annoying when your dehumidifier is not drying the air as it should. And with a Midea dehumidifier, it can feel even worse. After all, you’ve invested in a quality product and now it’s failing to live up to expectations. If your Midea dehumidifier isn’t effectively drying the air, don’t despair – there is likely an easy solution.

There are many potential reasons why your Midea dehumidifier may not be efficiently drying the air. The following are some of the most common issues that could be causing this problem:

  • There is a water vapor source in the room.
  • Room temperature is too low, below 5°C(41°F).
  • Check that all doors, windows and other openings are securely closed.
  • The humidity control may not be set low enough.

There is a water vapor source in the room:

If your Midea dehumidifier does not seem to be drying the air efficiently, it is possible that there is a water vapor source in the room. This could be anything from an open window or door, to a leaking pipe or overflowing sink.

The first step is to identify and eliminate any potential sources of water vapor. Once this has been done, it’s time to get your dehumidifier back up and running again. Make sure to check that all windows, doors and other openings are securely closed so that the dehumidifier won’t be competing with outside air for humidity.

Room temperature is too low, below 5°C(41°F)

If the room temperature is too low, below 5°C(41°F), your Midea dehumidifier will not be able to effectively dry the air. This is because a cold environment does not contain as much humidity as a warm one.

To get the most out of your dehumidifier, you need to make sure that the room temperature is at least 5°C (41°F). In addition to this, check that all windows, doors and other openings are securely closed so that the dehumidifier won’t be competing with outside air for humidity.

Windows are not close:

It’s so frustrating when you’ve invested in a quality dehumidifier only to find it isn’t doing its job as well as you thought! It could be that all your doors, windows and other openings are not securely closed. When outside air is allowed to enter the room, your dehumidifier has to work harder because it’s competing with outdoor air for humidity.

Humidity control may not be set low enough:

When your Midea dehumidifier is not drying the air as it should, another potential cause may be that the humidity control is not set low enough. In order for a dehumidifier to effectively remove moisture from the air, you need to make sure that the humidity setting is lower than the current relative humidity in your home.

Conclusion:

When your Midea dehumidifier isn’t effectively drying the air you need to look into possible causes such as a water vapor source in the room, the room temperature being too low or your windows not being securely closed. It is also important to check that the humidity control on your unit is set lower than the current relative humidity of your home. If none of these solutions fix the problem, please get in touch with Customer Service for further assistance.

Related F.A.Qs:

How do I reset my dehumidifier?

To reset your Midea dehumidifier, simply unplug the unit from the power source and then plug it back in. This will reset all settings to their default levels and allow you to start afresh.

How often should I empty my dehumidifier’s bucket?

It is advisable to empty the bucket of your Midea dehumidifier every day or two, depending on the humidity level of the room. This will help to ensure that it is working at its best and prevent any potential problems from arising.

What should I do if my dehumidifier stops working?

If your Midea dehumidifier has stopped working, the first step is to disconnect it from power and then reconnect it. If this does not fix the problem, you should consult the user manual for potential error codes and then take appropriate action.

About The Author

Scroll to Top