Frigidaire dehumidifier troubleshooting

Is your Frigidaire dehumidifier not working as expected? If so, don’t despair! I understand how aggravating it can be when your beloved appliance isn’t running as it should. Fortunately, most of the time the solution is simple and won’t require any major repairs. Below I have compiled a troubleshooting guide to get your Frigidaire dehumidifier up and running in no time.

The main factor causing the dehumidifier’s lack of operation is a blocked filter. To rectify this issue, just open the dehumidifier, examine the filter, and clean it if it’s soiled. If not, then replace it with a new filter.

Let’s dive into the depth of this blog post article to solve the issue of your frigidaire dehumidifier.

Frigidaire dehumidifier troubleshooting

Reason for Frigidaire dehumidifier troubleshooting:

Some of the main problems that can arise with your Frigidaire dehumidifier are:

  • The dehumidifier does not operate.
  • Produce loud noise.
  • The dehumidifier runs too much.
  • Frost appears on coils above the bucket.
  • Water flows into the bucket, even when the garden hose is equipped.
  • Frigidaire dehumidifier leaking from the bottom
  • Frigidaire dehumidifier blowing cold air
  • Frigidaire dehumidifier control panel not working

Frigidaire dehumidifier does not operate:

Troubleshooting of Frigidaire dehumidifier not working

If your Frigidaire dehumidifier does not operate, there are a few steps you can take to troubleshoot the problem.

  1. The wall plug and fuse.
  2. The dryness level you selected has been reached.
  3. The bucket is not installed properly.
  4. Empty it if the “BUCKET FULL” light is on.
  5. Make sure that your dehumidifier is powered on.

The wall plug and fuse:

Plug is pushed completely into the outlet

If your Frigidaire dehumidifier does not operate, it’s likely due to a problem with the wall plug or a blown fuse. When I faced this issue, I first checked my wall plug to make sure it was firmly connected. If that doesn’t work, you have to replace any blown fuses and reset any tripped circuit breakers.

The dryness level you selected has been reached:

The Frigidaire dehumidifier will shut off when the desired dryness level is reached. This is a normal operating procedure and it saves energy too. If you want to remove more moisture from the air, just select ‘CONTINUOUS’ using the humidity button on your machine. After that, reset the control to your preferred setting.

The bucket is not installed properly:

If your Frigidaire dehumidifier is not operating, it could be because the bucket is not installed properly.

The water tank is not in the correct position

To check this, you will need to remove the bucket and make sure it’s in the right position. If everything looks fine, reinstall it correctly and try again.

Empty it if the “BUCKET FULL” light is on:

If you see the “BUCKET FULL” light on your Frigidaire dehumidifier, it means that the bucket needs to be emptied. To do this, simply remove the bucket from the machine and empty the water. Then re-install it correctly to get your machine running again. Don’t forget – by emptying the bucket regularly, you’ll be able to keep your dehumidifier in tip-top shape and enjoy a healthier indoor environment.

Make sure that your dehumidifier is powered on:

If your Frigidaire dehumidifier is not operating, it could be that you need to turn the unit on. Make sure that you have pressed the power button and that your machine is switched on.

Frigidaire dehumidifier Produces loud noise:

Troubleshooting of Frigidaire dehumidifier loud noise issue

If your Frigidaire dehumidifier is making a loud noise while air is moving through it, this sound is normal. It is usually caused when

  • The unit has been placed on an uneven surface
  • The unit has been placed on a wooden floor

which can cause vibrations and make the fan sound louder. To solve this issue, simply put the unit on a flat surface to reduce the amount of sound it produces. You can also place a rug or mat beneath the dehumidifier to further reduce noise levels.

While fan noise is normal, if your Frigidaire dehumidifier is producing an unusually loud sound then the fan may be become dirty you have to clean it with water and a dry cloth.

The Frigidaire dehumidifier runs too much but the room is not dry enough:

When you notice your Frigidaire dehumidifier running too much but the room is still not dry enough, there are a few possible reasons why Frigidaire dehumidifier runs too much.

  • Windows or doors near dehumidifiers are open to the outdoors.
  • The area to be dehumidified is too large.
  • Air movement through the dehumidifier is blocked.
  • The dehumidifier must be placed in a space that does not restrict airflow into the rear coil or out of the front grill.
  • The dehumidifier is in the CONTINUOUS mode and will remain on in this mode, use the humidity button or knob to set an RH% higher level.
  • Room temperature is below41 °F(5 °C)

Windows or doors near dehumidifiers are open to the outdoors.

To ensure your Frigidaire dehumidifier is working properly, make sure all the windows and doors are closed because open windows and doors near your dehumidifier can increase the humidity in the room, making it more difficult for your dehumidifier to reduce moisture.

Check that all doors, windows, and other openings are securely closed

If the area you’re trying to dehumidify is too large or air movement through the dehumidifier is blocked, this could be causing your Frigidaire dehumidifier to run too much.

The dehumidifier runs too much but the room is not dry enough:

If you notice your Frigidaire dehumidifier is running too much but the room is still not dry enough, you may need to increase the size of the dehumidifier to make sure it covers the entire area you are trying to dehumidify because the area you’re trying to dehumidify is too large.

The dehumidifier is blocked:

The air movement through the dehumidifier can easily be blocked by furniture or other objects, so it is important to make sure that these are not blocking any of the vents. You should also take the time to regularly clean your Frigidaire dehumidifier according to the instructions in the “Care and Cleaning” section. This will help ensure that your dehumidifier is running as efficiently as possible.

Restrict air flowing into the rear coil:

If you notice your Frigidaire dehumidifier is running too much but the room is still not dry enough, make sure to check if the dehumidifier’s position is restricting air from flowing into the rear coil or out of the front grill. This can be done by moving any furniture or other objects that may be blocking these areas and checking for any possible obstructions.

If it is not possible to move the dehumidifier, try to make sure that there is enough space around the unit for air to circulate freely and reach all areas of the room.

The dehumidifier is in the CONTINUOUS mode:

A common reason why your Frigidaire dehumidifier is running too much but the room is still not dry enough could be that it is set in CONTINUOUS mode. This means that the dehumidifier will remain on until you manually turn it off or change the settings.

In this case, try using the humidity button or knob to set a RH% higher level. This will allow the dehumidifier to work more efficiently and dry the air in the room faster. You can also try increasing the fan speed – this will increase airflow, helping your dehumidifier remove moisture from the air even more quickly.

Room temperature is below41 °F(5 °C):

One potential reason why your Frigidaire dehumidifier is running too much but the room is still not dry enough could be that the temperature in the room is too low. The Frigidaire dehumidifier needs to operate in a temperature range of 41 °F (5 °C) or higher for it to work efficiently. If you think this could be the reason why your dehumidifier is not working properly, try increasing the temperature in the room.

Frost appears on frigidaire dehumidifier coils:

If you notice frost buildup on the coils of your Frigidaire dehumidifier above the bucket, it is playing their duty where the temperature is 41°F(5°C) to 59°F(15°C), it is defrosting automatically.

Troubleshooting of Frost appears on coils of Frigidaire dehumidifier

The compressor will stop momentarily and the fan speed will increase while the dehumidifier finishes its natural defrost cycle. Once complete, your Frigidaire dehumidifier should be back to normal operation with no further need for intervention from you.

The garden hose is equipped but Water flows into the bucket:

When operating a Frigidaire dehumidifier with a garden hose equipped, it is important to make sure that the outlet pipe is correctly positioned for it to drain properly.

Troubleshooting ofWater flows into the bucket of Frigidaire dehumidifier

Make sure that the hose is placed in a location where gravity can help it drain, and also make sure that there are no kinks or bends in the hose that could obstruct water from flowing freely.

Frigidaire dehumidifier leaking from bottom:

Have you noticed that your Frigidaire dehumidifier is leaking from the bottom? If so, there are a few possible reasons why this could be happening.

Frigidaire dehumidifier leaking from bottom

Here are some reasons why your Frigidaire dehumidifier may be leaking from the bottom:

  • The bucket is full and needs to be emptied.
  • The drain hose is clogged or blocked.
  • The dehumidifier fan is not working properly.
  • There is a crack in the bucket.
  • The bucket is incorrectly installed.

To get to the bottom of this issue, you will need to check each possible cause step by step. Start by checking that the bucket is empty and that there are no clogs in the drain hose.

Frigidaire dehumidifier blowing cold air:

Often, if you’ve had your Frigidaire dehumidifier on for a while and it starts to blow cold air then it could be due to a few different things.

Frigidaire dehumidifier blowing cold air

One potential reason why this is happening is because the temperature in the room has dropped significantly below 41°F (5°C). Your Frigidaire dehumidifier is designed to operate in temperatures no lower than 41°F (5°C), and if the temperature drops below this threshold then it will start blowing cold air and won’t be able to reduce the humidity in your home.

Another potential reason why your Frigidaire dehumidifier is blowing cold air could be because it needs to defrost. If the coils of your dehumidifier become too cold then frost can start to form, and when this happens it’s time for the dehumidifier to go into a defrost cycle.

During this process, the fan speed will increase while the compressor stops momentarily and blows out cold air until it has finished defrosting.

Frigidaire dehumidifier control panel not working:

If you find that your Frigidaire dehumidifier control panel is not working correctly, it’s time to take a look at some of the potential causes. it is a manufacturer issue

The first thing you should check is if the display of your dehumidifier has gone dark. If this is the case, try unplugging the unit and then plugging it back in again after a few seconds to see if that fixes the issue.

Frigidaire dehumidifier control panel not working Troubleshooting

If your Frigidaire dehumidifier control panel still isn’t working after this, then the issue could be due to a faulty wire or component. Check for any loose or damaged wires in the control panel and make sure that all connections are tight.

If everything looks good but your Frigidaire dehumidifier is still not working, it might be time to call a technician who can help you diagnose the problem and see if a repair is required.

We hope that this article has helped you understand why your Frigidaire dehumidifier control panel might not be working correctly and how to go about troubleshooting the issue.

Prevent tips for frigidaire dehumidifier troubleshooting:

Here are some preventative tips to help keep your Frigidaire dehumidifier running smoothly and efficiently:

  • Make sure to check the water level in the bucket regularly, especially if you have it set to continuous mode.
  • Clean the filters and coils regularly to ensure optimal performance.
  • Change the settings periodically so that your dehumidifier can adjust to the weather conditions.
  • Make sure you have a working drain hose, and that it is correctly positioned.
  • Check that the temperature in the room where your Frigidaire dehumidifier is operating does not fall below 41°F (5°C).

By following these tips, you should be able to keep your Frigidaire dehumidifier running properly and reduce the chances of it having any operational issues or problems.

Frigidaire Dehumidifier Error Code Troubleshooting and Solutions:

Two types of error codes light appear on the Frigidaire dehumidifier:

  • Error (F0)
  • Error (EC)

Frigidaire Dehumidifier Error Code (F0) & Solution:

Sometimes, when your dehumidifier shows the F0 error code, you can fix it easily by chang and clean the filter. Try these steps:

Solution:

  1. Turn off and unplug the dehumidifier.
  2. Take the filter out and clean it thoroughly.
  3. Put the cleaned filter back in its place.
  4. Plug in the dehumidifier and turn it on again.

If the F0 error code is still there, it might mean there’s a more significant problem – possibly a enclosed refrigerant.

Frigidaire Dehumidifier Error Code (EC) & Solution:

The EC error code on your dehumidifier is often caused by incorrect humidity settings.

Solution:

  1. Access the electronic control panel of your dehumidifier.
  2. Look for the humidity settings option.
  3. Adjust the humidity settings to fall within the recommended range, which is typically between 30% to 50%.
  4. Confirm and save the new settings.

By following these steps, you can resolve the EC error code issue and ensure your dehumidifier operates effectively within the appropriate humidity range.

How to reset the Frigidaire dehumidifier?

Resetting a Frigidaire dehumidifier typically follows a straightforward process. Below are the general steps for resetting it:

  1. Power Off: Make sure the dehumidifier is switched off and disconnected from the power source.
  2. Wait for a Brief Period: Leave the dehumidifier unplugged for approximately 10-15 minutes. This step is essential to discharge any residual power and reset the internal components.
  3. Plug In: After the waiting period, reconnect the dehumidifier to the power source.
  4. Adjust Settings (if necessary): Depending on the specific model, you may need to reconfigure certain settings. For instructions on resetting settings like humidity levels, fan speed, or timers, please refer to your dehumidifier’s user manual.
  5. Power On: Switch on the dehumidifier using the power button or control panel, ensuring it’s configured to your preferred settings.
  6. Monitor Operation: Once it’s powered on, observe the dehumidifier to ensure it’s operating correctly and maintaining the desired humidity levels.

Conclusion:

I hope that this article has helped you gain a better understanding of why your Frigidaire dehumidifier may be running too much and the potential reasons behind it. We have provided some tips and advice to help you troubleshoot common issues, from frost buildup on the coils to leaking buckets or control panels not working correctly.

Related F.A.Qs:

What is a common problem with a dehumidifier?

Block Airflow is a common problem with dehumidifiers. If the air intake or exhaust grilles become blocked with dust, lint, or pet hair, it can cause the unit to not operate correctly. Make sure all vents are clear and that there is sufficient airflow around the unit.

How often should I clean my Frigidaire dehumidifier?

We recommend cleaning your Frigidaire dehumidifier every 3 months or as needed. This includes cleaning the coils, filters, and other components to ensure optimal performance of the unit. Additionally, you should also check the bucket for any lint or debris that may have built up over time.

How do I know when my Frigidaire dehumidifier needs to be replaced?

If your Frigidaire dehumidifier is more than 7 years old, it may be time to consider replacing it. If you notice that the unit isn’t working as efficiently as before, or if there are any visible cracks or other signs of wear and tear, these are all indicators that it may be time to invest in a new dehumidifier. 

About The Author

Scroll to Top