Danby dehumidifier not collecting water

When you find your Danby dehumidifier not collecting water, don’t panic! You are not alone. We understand as many homeowners know the frustration of spending money on a device that doesn’t seem to be working correctly. But we want to assure you that there could be an easy fix with some simple troubleshooting steps.

“The primary cause of your Danby dehumidifier not collecting water is a faulty compressor. However, there’s no need to fret, as this issue can be readily resolved. Simply thoroughly inspect your unit to identify any visible signs of damage, and if needed, replace the defective compressor.”

In this article, we discuss some common reasons why your Danby dehumidifier not collecting water and offer tips on troubleshooting the device. We also provide advice on how to prevent any future issues from occurring. So, if you’re having trouble with your machine, continue reading to discover proven solutions for your Danby dehumidifier.

Danby dehumidifier not collecting water

Danby dehumidifier not collecting water:

The Danby dehumidifier is designed to extract moisture from the air in your home. It works by cooling the air, which causes the humidity to condense into liquid form, and then collects it in a container or drains it away through a hose. If you’ve noticed that your dehumidifier isn’t collecting any water, there are a few possible reasons why this might be occurring.

  1. Circuit Board Fatality
  2. Assessing Damaged Fan Blades
  3. Fan Motor Troubles
  4. Detecting a Faulty Compressor
  5. Dirty Filters
  6. Broken Capacitor
  7. Addressing Water Bucket Placement Issues in Your System”

1. When Circuit Board Fatality:

When the circuit board of your dehumidifier is damaged, it can prevent the device from collecting moisture. This can occur if there’s a power surge or a short in the wiring system. If you suspect that this is the problem, inspect your machine carefully for any signs of physical damage on the circuit boards.

Danby dehumidifier Not collecting water When Circuit Board Fatality

If you detect any visible damage, then you should replace the circuit board as soon as possible. If the boards appear to be in good condition, just power cycle your dehumidifier and try running it again. This might resolve any errors in the system that were preventing it from collecting moisture. Lastly, if none of these methods work, you may need to contact an experienced technician for further assistance.

2. Assessing Damaged Fan Blades:

When the fan blades of your dehumidifier become damaged, it can make it difficult for the machine to circulate air and collect moisture. This often happens when a foreign object gets stuck in the fan or if there’s excessive dust build-up on the blades that prevents them from spinning properly.

Danby dehumidifier Not collecting water When Fan Blades are Damaged

To troubleshoot this issue, first inspect the fan blades and look for any signs of damage or dirt. If you detect any problems, then it’s advised to clean the blades using a damp cloth and compressed air. This should help to restore your dehumidifier’s performance and enable it to start collecting moisture again.

If cleaning the fan doesn’t work, however, then you may need to replace the blades. This is a relatively simple and inexpensive repair that can be done in less than an hour. And once it’s completed, your dehumidifier should be able to start collecting water again without any issues.

3. Fan Motor Troubles:

The fan motor of your dehumidifier is a crucial component as it helps to circulate air and draw moisture from the atmosphere. But if this vital piece of hardware is damaged or not functioning correctly, then your machine won’t be able to collect any water.

Danby dehumidifier Not collecting water because Fan Motor is damage

To troubleshoot this issue, you should inspect the fan blades for any physical damage that could be inhibiting its performance. If you detect any problems, then it’s advised to clean the blades using a damp cloth and compressed air.

This should help restore your dehumidifier’s performance and enable it to start collecting moisture again. If cleaning the fan doesn’t work, however, then you may need to replace the motor itself.

4. Detecting a Faulty Compressor:

When detecting a faulty compressor, the primary cause of your Danby dehumidifier not collecting water is a faulty compressor. The compressor is an essential piece of hardware in any dehumidifier as it works to compress and expand refrigerant gas which helps to cool the air and extract moisture from it and then the humidity of the room collect in the dehumidifier bucket.

Danby dehumidifier Not collecting water when Compressor is faulty

If you suspect that there’s an issue with your compressor, then you should inspect the unit carefully for any signs of physical damage. If you detect any visible problems, then you may need to replace the compressor in order to restore your dehumidifier’s performance.

After replacing the compressor, it’s also important that you take some additional steps to ensure that future issues don’t arise. This includes regularly cleaning the filters of your dehumidifier and inspecting all electrical components for signs of wear or damage.

5. Filters are Dirty:

When your Danby dehumidifier filters become dirty, it can prevent the device from collecting moisture. The filter of your dehumidifier is essential for controlling the amount of dust and debris that’s flowing into the system. When these particles build up on the filter, they can reduce airflow and impede the performance of your machine.

Danby dehumidifier Not collecting water when the filter is dirty

To prevent this problem from occurring, you should inspect your filter every few weeks and clean it using a vacuum cleaner. This will help to ensure that your dehumidifier functions optimally and is able to collect moisture more effectively.

If you’ve neglected cleaning your filter for some time and find that it’s become excessively dirty, then you may need to replace the entire unit as soon as possible. This is because a dirty filter can not only reduce the performance of your dehumidifier, but it can also damage the internal components of the machine.

6. The Capacitor is Broken:

When the capacitor in your Danby dehumidifier is broken, it can cause your machine to stop collecting water. The capacitor helps to maintain an efficient and consistent flow of electricity throughout the system, so when it stops functioning correctly, this can reduce airflow and impede the overall performance of your device.

Danby dehumidifier Not collecting water when the Capacitor is Broken

In order to fix this problem, you’ll need to replace the broken capacitor. This is an easy and inexpensive repair that can be completed in less than an hour. If you’re not comfortable performing the task yourself, then you should contact an experienced technician to help you out.

Once your new capacitor is installed, your dehumidifier should start collecting water again without any issues. To ensure that this problem doesn’t arise again, you should check the capacitor regularly for signs of wear or damage.

7. The Water Bucket is not place properly:

When The Water Bucket is not placed properly in the Danby dehumidifier, it can prevent the machine from collecting moisture. This often occurs when the bucket isn’t secured to the unit correctly or if it’s placed too close to a wall or other obstruction.

Danby dehumidifier Not collecting water when the water bucket is not place properly

To troubleshoot this issue, first make sure that your water bucket is securely connected to the unit. Then move it away from any walls or other obstacles that may be preventing it from collecting moisture properly.

If these steps don’t work, then you may need to replace your water bucket as it may be damaged or too old. This is an easy and inexpensive repair that can usually be completed within minutes.

Reset the dehumidifier when unit not working well:

If your Danby dehumidifier is not collecting water, then you may need to reset it. This can help to restore the device’s performance and enable it to start collecting moisture again properly.

Resting the Danby dehumidifier when it Not collecting water

Resetting the dehumidifier can be done in just a few simple steps:

  1. Start by unplugging the device from its power source.
  2. Wait for 10 minutes before plugging it back in.
  3. Then press and hold the “Power” button on your dehumidifier for 2-3 seconds.
  4. After that, release the button and turn the unit back on.
  5. Finally, check to make sure that your dehumidifier is now collecting moisture properly.

By following these steps, you should be able to reset your Danby dehumidifier and restore its performance so it can start collecting water again without any issues.

Conclusion:

If your Danby dehumidifier not collecting water, there are several potential causes that you can investigate. From inspecting the fan blades for damage to checking the capacitor for signs of wear and tear, these simple steps should help you find the source of the problem and get your dehumidifier running again in no time. By following this guide, you can ensure that your dehumidifier operates correctly and provide you with the comfort and moisture-free air that you deserve.

Related F.A.Qs:

What is a common problem with a dehumidifier?

The most common problem with a dehumidifier is that it may not be collecting water. This can be caused by a range of issues, from a faulty compressor to dirty filters and incorrect placement of the water bucket.

How do I know if my dehumidifier compressor is bad?

If you suspect that your dehumidifier compressor is bad, then you should inspect the unit carefully for any signs of physical damage. If you detect any visible problems, then you may need to replace the compressor in order to restore your dehumidifier’s performance.

How often should I clean my dehumidifier filter?

You should inspect your filter every few weeks and clean it using a vacuum cleaner. This will help to ensure that your dehumidifier functions optimally and is able to collect moisture more effectively. If you’ve neglected cleaning your filter for some time and find that it’s become excessively dirty, then you may need to replace the entire unit as soon as possible.

About The Author

Scroll to Top