Arctic king dehumidifier troubleshooting

Experiencing issues with your Arctic King dehumidifier? No need to fret, troubleshooting is a straightforward process. I encountered this very situation when I initially purchased my Arctic King dehumidifier. After extensively searching for solutions online to address these common hiccups, I uncovered the answers and am eager to share them, especially if fellow Arctic King dehumidifier owners are currently facing any “Arctic King dehumidifier troubleshooting” dilemmas.

In Arctic King dehumidifier troubleshooting, there are two primary scenarios to consider: the unit not functioning at all or the unit generating unusual noises. The solutions for both problems are straightforward. First, examine the filter for any blockages. Second, ensure that the floor surface is Level. Lastly, confirm that the unit is properly plugged in.

I will go into further detail on Arctic King dehumidifier troubleshooting. Let’s dive in the depth of this article.

Arctic king dehumidifier troubleshooting

Related Post:

Main Arctic King Dehumidifier Troubleshooting Issues:

Some of the main problems that you have to face in Arctic King dehumidifier troubleshooting process are as follow:

  • Unit does not start
  • The dehumidifier does not dry the air as it should
  • The unit makes a loud noise when operating
  • Arctic King dehumidifier not collecting water
  • Frost appears on the coils
  • Water on floor
  • ES, AS, EC and P2 appear in the display

1. Arctic King dehumidifier does not start:

Arctic king dehumidifier does not start

I recently encountered a problem with my Arctic King dehumidifier – it wouldn’t start. After doing some troubleshooting, I discovered that there were a few potential culprits behind these issues that are very easy to solve.

  • The water bucket is not in the proper position.
  • Reached its preset relative humidity level or the bucket is full.
  • Check the house fuse/circuit breaker box.
  • Plug is pushed completely into the outlet.

The water bucket is not in the proper position:

If your Arctic King dehumidifier is not starting, one of the first things you should check is whether the water bucket is in the proper position.

The water bucket is not in the proper position

The water bucket must be properly seated and aligned with the unit’s air vent before it can turn on. If the bucket is not in its designated place, simply remove it and replace it back into position.

Reached its preset relative humidity level or the bucket is full:

When your dehumidifier reach the desire humidity level that has been set or the bucket is full, it will not start automatically. This is a safety feature so your dehumidifier don’t overheat and get damaged. To fix this, you can either empty out the water bucket or adjust the humidity level to accommodate for a higher reading.

Check the house fuse/circuit breaker box:

If the water bucket is in its proper position, and you’ve already adjusted the humidity level or emptied out the bucket, then it’s time to check your house fuse/circuit breaker box.

Check the house fuse circuit breaker box

It’s possible that a breaker may have tripped due to an overload of electricity, which could be preventing your dehumidifier from starting up properly.

Plug is pushed completely into the outlet:

If your Arctic King dehumidifier still isn’t working, the last thing you should do is make sure the plug is pushed completely into the outlet. It’s possible that it may have become loose over time and if this is the case, then simply push it back in firmly and your dehumidifier should start up again.

Plug is pushed completely into the outlet

2. Arctic King dehumidifier does not dry the air as it should:

If you’ve recently purchased an Arctic King Dehumidifier and it doesn’t seem to be drying the air as well as it should, there are a few things that could be causing this issue. Don’t worry – we’ve got the answers to help you get your dehumidifier up and running!

  • The humidity control may not be set low enough.
  • Check that all doors, windows, and other openings are securely closed.
  • Room temperature is too low, below 5 C(41 F).
  • There is a kerosene heater or something giving off water vapours in the room.

The humidity control may not be set low enough:

When using a dehumidifier, it is important to give it enough time to do its job. Depending on the humidity level in your room and other factors like the size of the space, you may need to let your Arctic King Dehumidifier run for 5 to 6 hours before expecting results. If not enough time has been given to remove moisture from the air, then the dehumidifier may not be able to do its job effectively.

Check that all doors, windows, and other openings are securely closed:

When it comes to drying the air in your room, you want to make sure that all of the doors, windows and other openings are kept securely closed. This will minimize any outside air from entering the room which would be counter productive to achieving the desired results.

Check that all doors, windows, and other openings are securely closed

Additionally, it’s important to note that dehumidifiers work best when there are no curtains, blinds or furniture blocking the front or back of the unit as this can reduce its overall efficiency. If these items are present, try moving them away from the dehumidifier to improve its performance.

Room temperature is too low, below 5 C(41 F):

It’s also important to note that dehumidifiers don’t work as well when the room temperature is too low – below 5 C (41 F). If this is the case, consider using a space heater to raise the temperature of your room by at least a few degrees and see if that improves your dehumidifier’s performance.

Kerosene heaters:

If you have a kerosene heater or anything else that gives off water vapors in the room, this can be counterproductive to what the dehumidifier is trying to achieve. Water vapor will increase the humidity level of the air and make it harder for your dehumidifier to do its job. If possible try to keep these items away from your dehumidifier, so that it can work as efficiently as possible.

kerosene heater in the room near the Arctic king dehumidifier

We hope these simple troubleshooting steps will help you get your Arctic King Dehumidifier running smoothly and start drying the air in your room like it should!

3. Arctic King Dehumidifier makes a loud noise when operating:

One night when you enjoying your sweet dream suddenly you hear an irritating humming or buzzing noise that breaks your dream into pieces. You realize it is coming from your Arctic King dehumidifier.

Don’t worry, this issue can be easily solved with a few steps. The three main reasons that can cause a loud noise when the Arctic King dehumidifier is operating are:

  • The air filter is clogged.
  • The unit is tilted instead of upright as it should be.
  • The floor surface is not level.

The air filter is clogged:

If the air filter is clogged, it can cause your Arctic King dehumidifier to make a loud noise. To stop the noise, you will need to clean or replace the air filter. First, open the cover of your dehumidifier and locate the air filter. Take out the air filter and inspect it for dirt and dust buildup. If there is a lot of dirt and dust, it is best to replace the air filter. If there is only a light amount of buildup, proceed with cleaning the air filter using a vacuum cleaner or by rinsing it with warm water.

Arctic king dehumidifier pre-filter cleaning with the use of vaccum cleaner

The life of Arctic King dehumidifier filter is 6 to 8 months and dependent on the amount of dirt and dust that it accumulates during its use. It is advisable to clean or replace the filter every few months for optimal performance.

The unit is tilted instead of upright as it should be:

If the Arctic King dehumidifier is tilted instead of upright, it can cause noise. To fix this, make sure that the unit is level and then try running the dehumidifier again.

You should also check if there are any objects or furniture close to the unit that could be causing a vibration. If there are, move them away from the dehumidifier and adjust the feet of the dehumidifier to make sure that it sits level on the floor.

Lastly, you can place a sheet of rubber or foam under each foot of your Arctic King dehumidifier to reduce any possible vibration. This should minimize the noise coming from your unit.

The floor surface is not level:

The floor surface can also cause the Arctic King dehumidifier to make noise. Make sure that the area you have placed your unit is level, so that the feet of the dehumidifier are firmly on the ground.

The floor surface is not level of Arctic king dehumidifier

If there is an uneven surface, you will need to adjust it in order for your dehumidifier to operate without making any noise. You can do this by placing a sheet of foam or rubber under each foot to ensure the unit is level. This will help reduce vibrations and minimize the noise that your dehumidifier makes during operation.

By following these steps, you should be able to identify and fix what is causing your Arctic King dehumidifier to make loud noises.

4. Arctic King dehumidifier not collecting water:

If your Arctic King dehumidifier is not collecting water, don’t worry! There are a few easy steps you can take to troubleshoot this issue and get your machine working again.

rctic King dehumidifier not collecting water

Here’s what to do:

  • Check the air intake filter and make sure it’s clean. A clogged filter can cause the dehumidifier to stop collecting water.
  • Check the air outlet area of the machine and make sure it’s not blocked. If it is, clear any debris that may be blocking the flow of air.
  • Make sure your dehumidifier is on a flat level surface. Slanted surfaces can cause problems with drainage and airflow.
  • Make sure the water tank hasn’t been removed from its compartment. A missing or loose tank can cause the dehumidifier to stop collecting water.
  • Check for any visible signs of damage on the machine, including cracks in the plastic parts of the dehumidifier or a bent fan blade. If you see any damage, contact a certified technician to repair the machine.

If you’ve tried all of these steps and your dehumidifier still isn’t collecting water, it may be time for a service call or replacement unit.

5. Frost that appears on the coils:

If you have an Arctic King dehumidifier, you may notice frost building up on the coils. This is completely normal and won’t cause any damage to your unit! The dehumidifier has an auto-defrost feature that will turn off the cooling fan and compressor, allowing the frost to melt. Once it’s melted, the unit will cycle back on to keep your air dry.

Frost appears on the coils of Arctic king dehumidifier

It’s important to note that if you find ice building up more than usual or the dehumidifier is cycling on and off frequently, there may be a problem with your drainage system. Double-check your drainage hose to make sure it’s draining properly.

6. Arctic King dehumidifier Water on floor:

If you have noticed water on the floor around your Arctic King dehumidifier, don’t worry! This is a common problem and can usually be easily fixed.

The most likely cause for water on the floor of your Arctic King dehumidifier are follow;

  • Hose to connector or hose connection may be loose.
  • Drain hose and adaptor are not removed when using bucket to collect water.

Hose to connector or hose connection may be loose:

Hose to connector or hose connection may be loose

The first thing to check is the hose connection and whether it may be loose. Make sure that your hose is firmly connected at both ends and if not, use a wrench or adjustable pliers to tighten the connection. This will ensure that water isn’t leaking from this connection point.

Drain hose and adaptor are not removed when using bucket to collect water:

The second common source of water on the floor around your Arctic King dehumidifier is caused by not removing the drain hose and adaptor when using a bucket to collect water. Make sure that these are removed before setting up the bucket and that it remain away from the appliance until you’re finished with draining. This will prevent water from leaking out from this connection while the bucket is being used.

7. ES, AS , EC and P2 appear on the display:

If you have an Arctic King dehumidifier at home, you may be familiar with the various letters and numbers that appear in the display. Chances are you’ve seen ES, AS, EC and P2 – but what do they mean?

These are error codes and protection codes. See CONTROL PADS ON THE DEHUMIDIFIER section.

  • ES stands for Electrical Safety
  • AS is Anti-Continuous Run
  • EC stands for Electric Cushion and
  • P2 represents the protection caused by high temperature.

ES indicates that there’s an issue with the device’s wiring or that it has been plugged in incorrectly. If you see ES on your dehumidifier’s display, check that the wiring is correct and that the device is plugged into a power source securely.

AS indicates an issue with the motor, which may be due to there being too much moisture in the air or because it has been running for too long. If you see AS on your dehumidifier’s display, switch it off immediately and allow it to cool down, then switch it back on again and check the display.

EC is another safety warning that indicates an issue with the dehumidifier’s component housing, which may be caused by overheating or dust buildup. If EC appears on your dehumidifier’s display, turn it off immediately and unplug the device to allow it to cool down. You can also try to remove any dust buildup from the component housing.

P2 indicates an issue with the dehumidifier’s temperature control mechanism and often appears when the ambient air is too warm or humid. If P2 appears on your device’s display, check the room’s temperature and humidity levels and adjust them if they are too high. You can also try switching the dehumidifier off and on again to see if the issue is resolved.

No matter which one of these codes appears on your Arctic King dehumidifier’s display, remember that safety should be your top priority.

Conclusion:

After reading this Arctic King dehumidifier troubleshooting guide, you should be able to identify and solve problems with your Arctic King dehumidifier. Whether it’s a simple fix or an in-depth repair job, we hope that this guide has provided you with the information and resources needed to get your dehumidifier up and running again. And remember: when in doubt, always consult a professional.

Related F.A.Qs:

What is a common problem with a dehumidifier?

Block air flow is one of the most common problems with a dehumidifier. This happens when the unit’s air flow is blocked by dust, dirt, and other debris that accumulates in the filter or the intake/exhaust vents.

How do I clean the filter on my Arctic King dehumidifier? Write in list:

To clean the filter of the Arctic King dehumidifier steps are follow:

  • unplug your unit and carefully remove the front panel of the dehumidifier.
  • Pull out the filter to remove it from the unit.
  • Rinse the filter in warm, soapy water and allow it to dry completely before re-installing it in your machine
  • Vacuum any dust or debris from around the filter compartment.
  • Reinstall the filter back into your dehumidifier, and then replace the front panel.
  • Plug your unit back in and turn it on to test that it’s working properly.

What happens if dehumidifier filter is dirty?

If the filter on your dehumidifier is dirty, it will reduce the efficiency of your machine and can lead to other problems such as water leaking from the unit. A dirty filter may also cause the unit to run longer than necessary in order to achieve adequate humidity levels.

About The Author

Scroll to Top