Airplus dehumidifier Troubleshooting

When your Airplus dehumidifier suddenly stops working, it can be incredibly frustrating, and you might find yourself wondering about “Airplus dehumidifier troubleshooting”. I know this firsthand because I’ve experienced this problem in the past. As an owner of an Airplus dehumidifier myself, I understand how important it is to have a functioning machine that helps remove excess moisture from the air.

The primary reason for the Airplus dehumidifier troubleshooting is a clogged filter. To address this, simply access the dehumidifier, inspect the filter, and clean it if it’s dirty. If not, proceed to replace it with a new filter.

I’ll teach you how to quickly and easily troubleshoot your Airplus dehumidifier in the event of a malfunction. Let’s dive into the depth of the Airplus dehumidifier Troubleshoot article.

Airplus dehumidifier Troubleshooting

Related Posts:

Reasons of Airplus Dehumidifier Troubleshooting & Solutions:

Some of the main problems that you have to face in the Airplus dehumidifier troubleshooting process are as follows:

  • Airplus dehumidifier not working.
  • Airplus dehumidifier makes loud noise.  
  • Airplus dehumidifier filter light blinking.
  • Airplus dehumidifier not collecting water but running.
  • Airplus dehumidifier runs but the room is not dry enough.
  • Airplus Frost appears on the coils above the bucket.    
  • How to troubleshoot Airplus dehumidifier dehumidity sensor?

Airplus dehumidifier not working:

Airplus dehumidifier not turning on

When it comes to the Airplus dehumidifier not working, this can be a frustrating issue. I faced this issue when our dehumidifier suddenly stopped working after months of reliable service.

  • Plug is pushed completely into the outlet.
  • Check the house fuse/circuit breaker box.
  • Water bucket is full.

The plug is pushed completely into the outlet:

First of all, when Airplus dehumidifier won’t power on you should make sure that the plug is pushed completely into the outlet. This may seem like a simple step, but oftentimes users forget to check this and it can easily cause your dehumidifier to stop working.

Plug is pushed completely into the outlet

I personally made this mistake in the past when I was dealing with our Airplus dehumidifier not working. I was so focused on looking for technical solutions that I overlooked this simple fix – but thankfully, it worked!

Check the house fuse/circuit breaker box:

When it comes to checking the fuse/circuit breaker, this is a crucial step. You don’t want to mess with electricity, so make sure you take all necessary precautions before handling the fuse/circuit breaker box.

Check the house fuse circuit breaker box

I personally faced this issue when our dehumidifier suddenly stopped working after months of reliable service. After looking into the problem, I realized that the fuse had tripped and caused the dehumidifier to stop working.

However, once I reset the fuse and plugged it back in, our Airplus dehumidifier was up and running again!

Water Bucket is full:

Another potential issue could be that the dehumidifier has reached its preset relative humidity level or the bucket is full. If this is the case, then you should empty the bucket and reset the relative humidity level of your Airplus dehumidifier.

I experienced this issue when I was trying to get our Airplus dehumidifier back up and running. The bucket was full and the relative humidity level was set too high for our needs, so I had to reset it and empty the bucket before the dehumidifier would start working again.

Airplus dehumidifier makes loud noise:

Noise Level Troubleshooting of Airplus dehumidifier

If you have an Airplus dehumidifier, chances are you’ve experienced a loud noise coming from the device while it’s running. This can be incredibly distracting and inconvenient, but the good news is that there are some steps you can take to troubleshoot this issue and enjoy your dehumidification experience in peace.

  • The air filter is clogged.
  • The unit is tilted instead of upright as it should be.
  • The floor surface is not level.

The air filter is clogged of Airplus dehumidifier:

If the air filter of your Airplus dehumidifier is clogged, it can cause the device to run louder than normal.

cleaning of Airplus dehumidifier block air filter

To prevent this from happening, make sure you regularly check and clean the air filter. If necessary, replace the filter with a new one. This will help your Airplus dehumidifier run smoothly and quietly once again.

The unit is tilted instead of upright as it should be:

In order to function best, the Airplus dehumidifier needs to be positioned upright on a level surface. If it is tilted or on an uneven floor, the internal components of the device will move around and cause noise. To avoid this issue, make sure you place the Airplus dehumidifier in an area where it can remain upright so that it can operate at its optimal level of performance.

The floor surface is not level:

If the floor on which your Airplus dehumidifier is placed is not level, it can cause the device to vibrate and make loud noises. To prevent this from happening, you should try and level out the surface as much as possible.

If you don’t have access to a spirit level or other tool to help with this, you can even use a stack of books or other objects to adjust the surface until it is level. This should help alleviate any noise coming from your Airplus dehumidifier and make it operate at its optimal level.

Airplus dehumidifier filter light blinking:

If your Airplus dehumidifier’s filter light is blinking, it could be a sign that the unit’s filter needs to be replaced. When this happens, the fan motor will not run and the air won’t be pulled through the filter. This means that dust particles and other allergens can build up in the room you’re attempting to dehumidify.

filter light blinking troubleshooting of Airplus dehumidifier

Fortunately, replacing the filter is an easy process that only takes a few minutes.

  • First, turn off your unit and unplug it from the wall outlet.
  • Next, locate the filter cover on the side or top of your Airplus dehumidifier and remove it.
  • You should be able to see the filter inside; remove it and set aside for disposal.
  • Then, take the new filter and insert it firmly into the unit, making sure that all of the edges are properly sealed.
  • Once installation is complete, reattach the cover and plug your Airplus dehumidifier back in.
  • Finally, turn the power switch to “on” once again and wait for a few seconds – the filter light should go off and the fan motor should begin running.

It’s important to remember to replace your Airplus dehumidifier filter at least once a year, or as needed if the filter light is blinking.

How to fix Airplus dehumidifier not collecting water but running?

I personally faced this issue when our Airplus dehumidifier suddenly stopped collecting water, but the fan was still running.

Airplus dehumidifier not collecting water but running

There are a few potential causes for this issue:

  • The temperature might be too low, which doesn’t allow the dehumidifier to collect any water.
  • The bucket might not be installed correctly or it could be full and needs to be emptied.
  • The air filter may need to be cleaned or replaced.
  • The humidity setting may need to be adjusted.

To troubleshoot this issue, I took the following steps:

  • I checked that the room temperature was above 65°F.
  • I made sure the bucket was properly installed and emptied it if necessary.
  • I cleaned or replaced the air filter.
  • I adjusted the humidity setting to the desired level.

These steps helped get our Airplus dehumidifier back up and running, collecting water as usual. I hope this helps anyone who is experiencing a similar issue with their dehumidifier!

How to fix dehumidifier not collecting water in winter?

During the colder months of winter, it’s not uncommon for dehumidifiers to stop collecting water. This can be a major concern for homeowners who rely on their dehumidifier to maintain proper levels of humidity in their homes. But fear not, as there are a few simple steps you can take to fix this issue and get your dehumidifier back up and running.

First, check the temperature of the room where your dehumidifier is located. If it’s below 65 degrees Fahrenheit, this could be the reason why your dehumidifier is not collecting water. Most models are designed to operate best in temperatures above 65 degrees, so consider moving your dehumidifier to a warmer location if possible.

Next, check the air filter on your dehumidifier. A dirty or clogged air filter can prevent proper air flow and hinder the collection of water. If needed, clean or replace the air filter according to the manufacturer’s instructions.

Another possible solution is to adjust the humidity setting on your dehumidifier. If it’s set too low, your dehumidifier may not run as often and therefore collect less water. Try increasing the humidity setting slightly and see if that makes a difference.

If none of these steps seem to work, it’s possible that the issue is with the dehumidifier’s compressor or refrigerant levels. In this case, it may be best to contact a professional for assistance.

By following these troubleshooting tips, you can hopefully get your dehumidifier back to functioning properly and keep the humidity levels in your home under control even during the winter months.

Airplus dehumidifier runs but the room is not dry enough:

The problem is usually caused by an incorrect setting that needs to be adjusted. Here are some steps you can take to troubleshoot this issue and enjoy a comfortable dehumidified space:

Airplus dehumidifier runs but the room is not dry enough troubleshooting
  • Check the relative humidity level to make sure it was set to a low enough level for our needs.
  • Ensured that the airflow wasn’t blocked by any furniture or other objects near the dehumidifier.
  • Make sure that all of the intake and exhaust vents are clear and unobstructed.
  • Adjusted the fan speed to a higher setting and ran it for a few hours.

By taking these steps, I was able to get our Airplus dehumidifier up and running smoothly. The humidity levels in the room dropped significantly and soon it was comfortable again.

Airplus Frost appears on the coils above the bucket:

If you’re using the Airplus dehumidifier for a long period of time, you may notice frost appearing on the coils above the bucket. This is a perfectly normal occurrence and does not indicate any malfunction in your device. It’s simply an indication that your unit is working properly and performing its job of removing moisture from the air.

Airplus Frost appears on the coils above the bucket

The frost is generally caused by the dehumidifier’s fan motor. As it pulls air from the room, it carries with it a certain amount of moisture that then passes over the cold coils inside the unit. This causes some of that moisture to condense into small drops which freeze and turn into frost.

So don’t worry if you see frost on your Airplus dehumidifier’s coils – it just means that your unit is doing its job.

However, if the frost continues to build up and causes your Airplus dehumidifier to become less efficient at removing moisture from the air, you can turn off the device periodically and give it a few minutes to let the frost melt away before turning it back on again. This should help it to operate more effectively and efficiently.

How to Troubleshoot Airplus dehumidifier sensor?

If you’re having trouble with your Airplus dehumidifier’s humidity sensor, it could be due to a few different things.

How to troubleshoot Airplus dehumidifier dehumidity sensor

Here are some tips to help you troubleshoot the issue and get your device running properly again:

  • Make sure the sensor is correctly connected to the unit. If it’s too tight, it may need to be adjusted so that air can flow freely through it.
  • Check that all of the vents and grills on your unit are clean and free from dust and debris. This will ensure that the sensor is able to pick up accurate readings.
  • Ensure that your humidity settings are set correctly for the room you’re attempting to dehumidify. A too low setting can cause false readings, while a too high setting may not allow the unit to run properly.
  • If possible, try resetting the humidity sensor. This should help recalibrate it and provide more accurate readings.
  • If all else fails, contact Airplus customer service for assistance with troubleshooting your device’s humidity sensor.

We hope these tips will help you get your Airplus dehumidifier running properly again! With just a few simple steps, you should be able to fix any issues with the humidity sensor and get back to enjoying a comfortable, dehumidified space.

How to reset the Airplus dehumidifier?

If you’re having trouble with your Airplus dehumidifier, it’s likely that it needs to be reset. Here are some tips on how to do so:

press the power button of Airplus dehumidifier to rest it
  • First, turn off the power switch and unplug your device from the wall outlet.
  • Next, press and hold down the “Reset” or “Power” button for 3 seconds. This should reset the device to its default settings.
  • Plug the dehumidifier back in and turn the power switch on again.
  • Finally, adjust your device’s settings as desired for a comfortable dehumidified space.

Resetting your Airplus dehumidifier is an easy process that can help you get it running smoothly again.

Conclusion:

We hope that with these troubleshooting tips, you’ll be able to quickly get your Airplus dehumidifier back up and running so that you can again enjoy a comfortable, dehumidified space.

From cleaning or replacing the air filter to resetting the humidity sensor, there are many simple steps you can take to solve any issues you’re having with your device. Remember, it’s also important to check the filters regularly and replace them as needed.

Keeping your Airplus dehumidifier in good condition is the best way to ensure you get maximum performance and many years of trouble-free operation.

Related F.A.Qs:

Dehumidifier compressor not turning on?

If your dehumidifier’s compressor isn’t turning on, the first thing you should do is check to make sure the power switch is switched on and that the unit is plugged in. Then, try resetting your device by unplugging it for 10 seconds before plugging it back in again.

How to test dehumidifier humidity sensor?

In order to test the accuracy of your dehumidifier’s humidity sensor, you’ll need a hygrometer or other device that can measure relative humidity levels in the room. Place the measuring device next to your dehumidifier and compare the readings.

How do I clean the humidity sensor on my dehumidifier?

Lightly wipe or vacuum the humidity sensor with a soft cloth or brush. Taking care not to damage the delicate parts, use appropriate cleaning solutions and materials for your specific device.

About The Author

Scroll to Top